Liaoning · Shenyang
Product Structure: Horizontal
Power Range: 3,000–60,000 kW
Pole Range: : 2P
Rated Voltage: 6,300 V, 10,500 V
Protection Class: IP44
Cooling Method: IC91W, IC37
Mounting Type: IM 7311
Rated Frequency: 50 Hz
Insulation Thermal Class: Class F
Excitation Method: Brushless – with matching rotating rectifier and static excitation cabinet
Applicable Industries
Petroleum, chemical, metallurgy, steel, etc.
Suitable Environments
Suitable for thermal power generation
QF Series Turbine Generator Technical Data (Design Values)
| Type | Power (kW) |
Voltage( V) | Current(A) | Power Factor (cosφ) |
Efficiency (%) |
| QF-3-2 | 3000 | 6300 | 344 | 0.8 | 96.5 |
| 10500 | 206 | ||||
| QF-4.5-2 | 4500 | 6300 | 515 | 0.8 | 96.6 |
| 10500 | 309 | ||||
| QF-6-2 | 6000 | 6300 | 687 | 0.8 | 97 |
| 10500 | 412 | ||||
| QF-7.5-2 | 7500 | 6300 | 859 | 0.8 | 97.2 |
| 10500 | 515 | ||||
| QF-10-2 | 10000 | 6300 | 1146 | 0.8 | 97.4 |
| 10500 | 688 | ||||
| QF-12-2 | 12000 | 6300 | 1375 | 0.8 | 97.6 |
| 10500 | 825 | ||||
| QF-15-2 | 15000 | 6300 | 1718 | 0.8 | 97.6 |
| 10500 | 1031 | ||||
| QF-18-2 | 18000 | 6300 | 2062 | 0.8 | 97.6 |
| 10500 | 1237 | ||||
| QF-30-2 | 30000 | 6300 | 3436 | 0.8 | 97.8 |
| 10500 | 2062 | ||||
| QF-60-2 | 60000 | 6300 | 6872 | 0.8 | 98 |
| 10500 | 4124 |
QF Series Turbine Generator Outline Drawing and Installation Dimensions
| Type | Overall Dimensions(mm) | Type | Overall Dimensions(mm) | ||||||||
| A | B | C | D | E | A | B | C | D | E | ||
| QF-0.5-2 | 3510 | 1390 | 800 | 4000 | 1440 | QF-3-2 | 4438 | 1780 | 500 | 5000 | 1300 |
| QF-0.75-2 | 3650 | 1390 | 800 | 1200 | 1440 | QF-6-2 | 4980 | 2190 | 630 | 5500 | 1960 |
| QF-1-2 | 3800 | 1390 | 800 | 4400 | 1440 | QF-12-2 | 6429 | 2470 | 630 | 6800 | 2275 |
| QF-1.5-2 | 4030 | 1640 | 800 | 4500 | 1565 | QF-15-2 | 8035 | 2750 | 750 | 8800 | 2810 |
Note: Due to continuous technical improvements and updates to domestic/international standards, dimensions and technical parameters in this document are subject to change without prior notice. For orders, the final dimensions shall be based on the mutually confirmed outline drawings.
