High Weir Spiral Classifier-【价格，厂家，求购，使用说明】-矿采网，Shandong Xinhai Mining Technology&Equipment Inc.

High Weir Spiral Classifier

Model：

FLG-2400

Sprial Diameter：

φ2400mm

Sprial Revolution：

3.6r/min

Production Capacity：

COLLECT

Shandong Xinhai Mining Technology&Equipment Inc.

Shandong · Yantai

Main Products：Ball mill, flotation machine, classifier, thickener, leaching tank, electrolytic system, dewatering screen, autogenous mill/semi-autogenous mill, wet rod mill, vibrating screen, mixing tank, cyclone, wear-resistant rubber slurry pump, graphite-specific stirring mill, feeder, conveyor, rubber sheet, knife gate valve (non-leakage valve), pinch valve, three-way reversing valve, CNC dosing machine, scrubber, dry ball and rod mill, deoxidizing tower, carbon extraction pump, carbon separator screen, air lifter, baffled settler, electromagnetic iron separator, metal detector, flocculant system, electronic belt scale.

Enter the store

︿

﹀

Details Parameters

Details Introduction

Principle Overview

The finely ground slurry is fed into the water tank from the feed inlet located in the middle of the settling zone. Below the inclined water tank is the slurry grading settling zone, where the spiral rotates at low speed to stir the slurry, causing fine particles to suspend and overflow at the overflow weir. Coarse particles settle to the bottom of the tank and are transported by a screw to the discharge port as return sand for discharge. The position of the overflow weir is higher than the bearing center at the lower end of the spiral shaft and lower than the upper edge of the overflow end spiral.

Equipment Features

An automatic sand return lifting device has been added to the sand return end, and the ball mill has removed the configuration of a large spoon head;

Each ton of ore can generally save 1-1.5 degrees of electricity;

Avoiding frequent maintenance of the big spoon head of the ball mill;

Reduced the uneven impact of the ball mill on the large and small gears.

Scope of Use

Suitable for coarse particle grading.

Type	Model	Spiral Speed (r/min)	According to the sand return processing capacity (t/d)	Based on Overflow Capacity (t/d)	Spiral Diameter (mm)	Spiral Length (mm)	Sink Slope	Transmission motor model	Transmission motor power (kW)	Elevator Motor Model	Elevator Motor power (kW)	Weight (kg)
High Weir Single Spiral	FLG-300	7.7	30~80	10~30	φ300	3900	14~18	Y100L1-4	2.2	Manual	—	668
	FLG-500	8	145~260	32	φ500	4390		Y112M-6	2.2			1600
	FLG-750	7.8	256~654	65	φ750	5500		Y132S-6	3			2716
	FLG-1000	6.7	473~1026	85	φ1000	6556		Y132M2-6	5.5			4000
	FLG-1200	5，6，7	1145~1600	150	φ1200	6500		Y132M2-6	5.5	Y90L-4	1.5	7943
	FLG-1500	2.5，4，6	1140~2740	235	φ1500	8265		Y160M-6	7.5	Y100L1-4	2.2	11827
	FLG-2000	3.6，5.5	3890~5940	400	φ2000	8700		Y160L-6/4	11，15	Y100L2-4	3	20814
	FLG-2400	3.6	6800	580	φ2400	9130		Y200L2-6	22	Y112M-4	4	24194
	FLG-3000	3.2	11625	890	φ3000	12500		Y200L-4	30	Y112M-4	4	42188
High Weir Dual Spiral	2FLG-1200	5，6，7	2340~3200	310	φ1200	6500		Y132M2-6	5.5×2	Y90L1-4	1.5×2	15840
	2FLG-1500	2.5，4，6	2280~5480	470	φ1500	8230		Y160M-6	7.5×2	Y100L1-4	2.2×2	22903
	2FLG-2000	3.6，5.5	7780~11880	800	φ2000	8400		Y160L-4	15×2	Y100L2-4	3.0×2	34621
	2FLG-2400	3.63	13600	1160	φ2400	9130		Y200L2-6	22×2	Y112M-4	4×2	42460
	2FLG-3000	3.2	23300	1785	φ3000	12500		Y200L-4	30×2	Y112M-4	4.0×2	73030