移动升降输送机使用广泛,主要分为TD75型和新型。TD75型主要适用于钢厂、电厂、煤矿、纸厂、化工厂、矿山中料场的堆料和港口装船卸船,新型移动升降输送机适用于饲料厂、面粉厂、棉油厂、化肥厂、水泥厂、粮库、物流等装车卸车。
该系列移动升降输送机具有结构合理,操作方便,性能稳定,噪音低,不跑偏,不丢转、效率高,使用安全,经久耐用,外形美观等优点。
规格
皮带宽度:0.5-1米
皮带长度:5.0-30米
升降高度:1.0-15米
动力:1.5KW-11KW
速度:0.1-5米/秒
输送量:50吨-1000吨/小时
优点
1、环形输送带
2、升降增加了安全保险装置
3、选用轴承滑轮组
4、升的更高,降得更低
5、专业设备除锈
6、送料爬坡能力强
7、动力强运送量大
8、移动灵活
9、外形美观耐用
There are two kinds of portabel belt conveyor. One is TD75 belt conveyor. Another is new type belt conveyor.TD75 belt conveyor is for steel mill, power plant, coal mine, paper mill, chemical plant, stocking and recaliming transporter, port loading and unloading.
New type belt conveyor is for feed mill, flour mill, contton oil plant, chemical fertilizer plant, cement plant,grain depot, logistics and so on.
This kind of belt conveyor is vey good structure, easy operation, low noise, never lock, never lose turnning.It is efficient,safety in use, long durable life, nice exterior and so on.
Specification
Belt width: 0.5m-1meter
length: 5.0m-30m
Lifting height: 1.0m-15m
Power: 1.5Kw-11KW
Speed: 0.1-5m/s
Capacity: 1000t/h
Advantage
1.Endless rubber belt
2.Safety riser
3.Bearing pulley block
4.Lift higher,drop lower
5.Professional equipement cleaning
6.Good Feed climbing ability
7.Power is big,Capacity is good
8.Mobility
9.Nice appearance
产品展示
平行式新型移动升降输送机
New type portable lift conveyor
轻型大倾角输送机
Light steeply inclined belt conveyor
新型移动升降输送机
New type portable lift conveyor
大型移动升降输送机
Large mobile elevating conveyor
输送机驱动选型
电机三角带倒轴驱动:
优点:价格低廉,使用方便,维修简单。
缺点:过载能力差,过载时会打滑,占用空间,机械传递效率低。
适用范围:短距离的小型输送机。
Motor V-belt beaming Driver:
Advantage: competitive of price, easy of use; simple of maintainance.
Disadvantage: Overload capacity is poor, and it will slip when overloaded. Also it occupies too much space and low of transmission efficiency.
Scope:Small short-haul belt conveyor.
电机三角带与F系列减速机驱动:
优点:结构较紧凑,抗冲击能力强,过载能力强,经久耐用,维护较方便,可用于工况条件变化大的场合。
缺点:造价较高,占用空间。
适用范围:矿山、碎石厂等恶劣环境。
Motor V-belt and F series Reducer with driver:
Advantage:Its compact structure, strong shock resistance ability, powerful of overload capacity, durable quality, simple of maintainance and it can be used in occasions which is large changeable operating conditions.
Disadvantage:Its cost is more higher and takes up much space.
Scope:Mining,stone crushing plant and other harsh environments construction area.
电动滚筒驱动:
优点:结构紧凑,易于安装使用,使用方便,价格较低。
缺点:维修困难,更换复杂。
适用范围:中短距离的输送机,对检修时间要求不严格的场合。
The Driver of Electric Pulley:
Advantage: Its compact structure, easy to install, convenient to use and more lower price.
Disadvantage: Difficult to maintain and complex to replace.
Scope: Middle and short-haul belt conveyor, and occasions for Its maintainance time which is not strictly required.
K系列减速机驱动:
优点:结构较紧凑,空心轴输出易于安装,对中性好,机械传递效率高,运行稳定,不易出故障。
缺点:价格较高。
适用范围:中长距离、大运量、高功率的输送机。
K series Reducer Driver:
Advantage: It is more compact structure, and hollow shaft output is easy to install, its good coaxial and high efficiency of mechanical transmission, running is stable and it is not easy to out of order.
Disadvantage: More Higher cost.
Scope: Belt conveyor of middle and lona-distance,large capacity and high power.
直交轴工业齿轮箱驱动:
优点:结构较紧凑,机械传递效率高,传递扭矩大,过载性能好,运行稳定,不易出故障,减速机散热条件好。
缺点:价格高,需用液力耦合器和联轴器等配件,安装技术要求高。
适用范围:长距离、大运量、高功率及恶劣环境下使用的输送机。
industrial JRHB:
Advantage: Its more compact structure, high efficiency of mechanical transmission, large torque of transfer, good of overload capacity, stable of operation, and its few breakdowns, the heat transfer conditions is aso good.
Disadvantage: Its High price, and it also requires the hydraulic coupling and coupling and other accessories, and high technical requirements of installation.
Scope: Belt conveyor are used in long-distance, large capacity, high power and harsh environments.